INSPECTION, TESTING AND MEASUREMENT EQUIPMENT

• Coating contact resistance tester
• Portable coating thickness meters (Eddy current - Magnetic)
• Surface reflectivity 60E glossmeter Glossgard II
• X-ray Fluorescence coating thickness meter TC-5500
• Conductivity Testing Instrument DC-1

CHEMICAL AND MECHANICAL TESTING

• Analytical balance Mettler
• Coating internal stress tester (Contractometer) QCI
• Colour comparison light booth Macbeth The Judge II
• Taber Abraser 5130
• Universal impact tester
• Spectrophotometer DR/3
• Atomic absorption spectrometer
• Electronic pH-meter
• Salt spray chamber (corrosion resistance testing) maximum 47" x 30" x 23"
• Solution conductance meter YSI 35
• Tensile testing of notched bars
• Volumetric chemical titration’s

NON DESTRUCTIVE TESTING (NDT)

• Liquid penetrant inspection (all sensitivity levels) 48" x 48" x 20"
• Magnetic particle inspection maximum 97" x 30" x 30"
• UV light / Visible light borescop Olympus UVM 1690

HEAT TREATMENT

• Stress relief and hydrogen embrittlement relief maximum 100" x 77" x 77"
• Using precision calibrated air circulating ovens from 275°F to 1000°F

MECHANICAL SURFACE PREPARATION

• Glass beads peen maximum 100" x 28" x 22"
• Aluminium oxide blast maximum 100" x 28" x 22"
• Plastic media blast maximum 100" x 28" x 22"
• Shot peening maximum 30" x 30" x 20"
• HVOF
• Grinding

CHEMICAL AND MECHANICAL SURFACE PREPARATION

• Vacuum vapour degrease:
  - vertical chamber maximum Ø 22" x 22"
  - horizontal chamber maximum Ø 13" x 48"
• Alkaline clean maximum 70" x 30" x 30"
• Pickle and etch maximum 45" x 30" x 30"
• Aluminium surface treatment for adhesive bonding maximum 70" x 30" x 30"
  

PROTECTIVE TREATMENTS

• Alkaline anodizing of titanium alloys maximum 45" x 30" x 30"
• Black oxide on steel maximum 48" x 36" x 24"
• Cadmium plating:
  - rectangular tanks maximum 45" x 30" x 30"
  - circular tanks maximum Ø 10" x 80"
• Chemical conversion coating on aluminium alloys maximum 65" x 30" x 30"
• Chemical conversion coating on magnesium alloys maximum 45" x 30" x 30"
• Chromic acid anodizing of aluminium alloys maximum 110" x 38" x 33"
• Copper plating maximum 45" x 30" x 30"
• Electroless nickel plating maximum 48" x 40" x 35"
• Electropolishing of stainless steels maximum 65" x 25" x 7"
• Hard anodizing of aluminium alloys maximum 90" x 35" x 40"
• Low embrittlement cadmium plating maximum 88" x 30" x 30"
• Nickel plating maximum 48" x 30" x 30"
• Passivation of stainless steels maximum 30" x 30" x 24"
• Phosphatizing (Zinc or Manganese phosphate) maximum 48" x 33" x 30"
• Silver plating maximum 45" x 30" x 30"
• Sulfuric acid anodizing of aluminium alloys maximum 78" x 30" x 30"
• Tin plating maximum 47" x 30" x 30"
• Zinc plating maximum 35" x 30" x 30"

PAINTING AND DECORATIVE FINISHES

• Paint booth maximum 140" x 95" x 90"
• Paint curing oven maximum 140" x 86" x 60"

OTHER PROCESSES

• Solid Film Lube maximum 140" x 95" x 90"
• Lubricant curing oven (certified up to 600ºF) maximum 140" x 86" x 60"
• Teflon Seal on Anodizing maximum 33" x 33" x 24"
• HVOF
• Grinding of HVOF